Hogarth Picture Lights: Power Options

All our lights can have power options of - Mains Power - Invisible Wire - Battery - THinWire

Hogarth have developed a new - hidden wire system (TM) - for clients who can not put cables into walls and do not wish to have spot lights on the ceiling or a battery option. Available for 120v or 240v - all the parts ready to install.

Before with no illumination This installation is in a very old Georgian Property Our client did not wish to have cables in the wall. Spot lights were not an option and would look out of place attached to the fine oak beams

Copper track applied to wall The Copper track is just 4 thousands of an inch thick (twice the thickness of a human hair) with a peel off backing with non conductive adhesive. When painted over becomes invisible.

Terminating at the painting and at the plug

240 volts shown with transformer by socket

Decorating tape applied over the track

The installation completed. The Light is our LED (light emitting diode) Emitting Zero Heat & Zero UV. The fitting time was less than 1 hour to apply the track - tape - wire connections.

With the wall repainted the track is invisible

The Battery option comes with 2 battery packs ( 1 for lighting whilst the other is charging ) and a charging unit.

20 Hours use - re chage time 1.5 hours

Battery Type:

• High 4200mAh Capacity Nickel Metal Hydride.
• All Cells are matched.
• No cell memory, you can recharge the pack without fully discharging!
• Dimensions : 5.3" x 1.87" x 0.97"
• Voltage: 7.2V

Back of painting with battery pack (contemporary light shown) All our lights can have the Battery option.

Quick connector to change battery

Battery parts - 2 packs and charger (1 battery being charged whilst the other is in use) batteries are 5 inches long X 3/4 inch thick

20 hours duration per pack and recharge time of 1 hour

Installing the light is simple - just attach the bracket - push on the connector and the light works